-
Boosting Efficiency with Inconel 601: The Key to High-Performance Heat Exchangers
Alloy 601 is a nickel-based alloy with excellent corrosion resistance and high-temperature strength that is widely used in industrial applications in high-temperature, corrosive and corrosive/thermal fatigue environments. Below is more information about Alloy 601: Specific Grades: Common grades o...Read more -
Monel 405 alloy hot and cold working properties, welding material, applications
Moenl 405 is a high nickel-copper alloy containing approximately 63% nickel and 30% copper, as well as some chromium and iron. The alloy has good corrosion resistance and mechanical properties and is suitable for applications in high temperature and high pressure environments. In terms of forging...Read more -
High-temperature alloy for thermal power generation corrosion resistant alloy Hastelloy
The development of clean coal combustion technology is widely carried out in the world today, pursuing high efficiency and low emission of coal-fired units. New thermal power generation technologies such as supercritical and ultra-supercritical units, large-scale CFB (Circulating Fluidized Bed Bo...Read more -
Hastelloy corrosion-resistant alloys for glass industry
Production of glass and its products at a high temperature of 1250 ℃, some glass products production equipment with high temperature parts of the use of temperature 950 ~ 1250 ℃, and the glass composition contains a large number of alkaline oxides, as the production of high-temperature parts of h...Read more -
Composition, organization and properties of high temperature alloys for turbine blades
With the continuous development of gas turbines and aero-engines, the gas temperature in front of the turbine is getting higher and higher, and the requirements for high-temperature strength of high-temperature alloys are getting higher and higher. Therefore, the degree of alloying of turbine bla...Read more -
Development of high-temperature alloys and high-nickel alloys special alloys for turbine blades
Turbine working blades rotate at high speed in high temperature gas, not only bear its own centrifugal force, aerodynamic force, thermal stress and vibration load, but also be corroded under the action of gas. Therefore, it is the most severe working conditions in the engine parts. Improve the ga...Read more -
Hastelloy high-temperature alloy turning processing example
High-temperature alloy machining must pay attention to: both the requirements of the tool sharp, but also to ensure adequate tip strength. The edge must be carefully sharpened, to maintain a better surface roughness of the tool, to ensure that the edge is smooth, do not allow any chipping, notchi...Read more -
Breaking Boundaries with Nimonic 80A: Achieving Unprecedented Strength and Durability
1.1 Introduction High-temperature alloys, also known as heat-resistant alloys, superalloys, or heat-strength alloys, are a class of alloys that can withstand complex stresses and work reliably for long periods of time at high temperatures ranging from 600°C to 1100°C and under gas oxidation and c...Read more -
Study on corrosion resistance of Hastelloy C-22 laser welded joints
Hastelloy C-22 is a nickel-based alloy with good corrosion resistance. The material as an electro-galvanized conductive roll external cladding material, its welding and weld region of the corrosion resistance of the problem has become a key factor affecting the working life of the conductive roll...Read more -
Corrosion resistance of pulsed laser welded joints between Haystelloy C276 alloy and 304 stainless steel
As the living standard of human beings continues to improve, people’s demand for energy has increased dramatically, and the pressure on the environment continues to increase due to the massive consumption of traditional energy sources, the development of nuclear energy, a clean energy sourc...Read more -
Corrosion Behavior of Hastelloy X after Surface Modification with Strong Current Pulsed Electron Beam
Hastelloy X is a high-temperature nickel-based alloy used in hot end components such as combustion chambers of aero-engines. The combustion chamber is subjected to high temperature oxidation and corrosion during service, which accelerates its failure. In order to extend the service life of the co...Read more -
Study on the relationship between oxidation kinetics of nickel-based high-temperature alloys and the evolution law of oxide film structure
With the increasing power and thermal efficiency of aero-engines, the surface service temperature of turbine blades and other components is getting higher and higher. The harsh service environment makes high-temperature oxidation one of the main factors of component failure, which can lead to cat...Read more
