AMS 5659 15-5PH/UNS S15500/XM-12 stainless steel straight bar for pulp and paper

Short Description:

15-5 PH, also known as also known as UNS S15500 or XM-12,is a martensitic, precipitation hardening stainless steel. Popular due to its high strength and good corrosion resistance. 15-5 PH stainless steel is a martensitic precipitation-hardening stainless steel with approximately 15% Chromium and 5% Nickel. It has high strength, high hardness, and excellent corrosion resistance. Strength can be further increased by a single low temperature heat treatment. Compared to 17-4 PH, it offers better transverse toughness and ductility; better mechanical properties in larger cross-sections, and better forgeability. It is readily weldable. It can be machined in any of the several Thermal Conditions available to this grade.

Send email to us

Product Detail

Product Tags

Applications

13-8 PH stainless steel is typically used in the following applications:
Used primarily for parts requiring corrosion resistance, stress-corrosion, and high strength 600°F (316°C), with good ductility and strength in transverse direction for
▪ Aerospace components
▪ Injection molding equipment
▪ Waterjet cutting equipment
▪ Petrochemical industries
▪ Nuclear industries

Chemical Composition

Symbol	Element	Min %	Max %
C	Carbon		0.05%
Mn	Manganese		0.10%
Si	Silicon		0.10%
P	Phosphorus		0.010%
S	Sulfur		0.008%
Cr	Chromium	12.25%	13.25%
Ni	Nickel	7.50%	8.50%
Mo	Molybdenum	2.00%	2.50%
N	Nitrogen		0.010%
Al	Aluminum	0.90%	1.35%
Fe	Iron		Balance

Mechanical Properties

Condition	Tensile	Yield 0.2% offset	Elongation (%in 2")	Reduction of Area	Brinell Hardness	Rockwell Hardness
Ann	175 ksi max				363 max
H950	220 ksi	205 ksi	10%	45%		C45 min
H1000	205 ksi	190 ksi	10%	50%		C45 min
H1025	185 ksi	175 ksi	11%	50%
H1050	175 ksi	165 ksi	12%	50%		C40 min
H1100	150 ksi	135 ksi	14%	50%		C34 min
H1150	135 ksi	90 ksi	14%	50%		C30 min

Available Sizes And Specifications

13-8PH stainless steel plate sizes and specifications
Grade	13-8PH
Cold rolled stainless steel plate	Thickness: 0.3mm- 16.0mm, Width: 1000mm - 2000mm, Length: as requirements, Surface: 2B/BA/SB/8K/HL/1D/2D etc
Hot rolled stainless steel sheet	Thickness: 3.0mm - 300mm, Width: 1000mm - 3000mm Length: as requirements, Surface: No.1/pickling
Standard	ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303, BS 1449, DN17441, G4305
Stainless steel plate	Thickness: 8.0mm - 300mm, Width: 1000mm - 3000mm Length: as requirements, Surface: No.1/pickling

13-8PH stainless steel strip sizes and specifications
Grade	13-8PH
Cold rolled stainless steel strip	Thickness: 0.3mm- 3.0mm, Width: 5mm - 900mm, Surface: 2B/BA/SB/8K/HL/1D/2D etc
Hot rolled stainless steel strip	Thickness: 3.0mm - 16mm, Width: 10mm - 900mm Surface: No.1/pickling
Stainless steel foil	Thickness: 0.02mm- 0.2mm, Width: Less than 600mm, Surface: 2B
Standard	ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303, BS 1449, DN17441, G4305

13-8PH stainless steel coil sizes and specifications
Grade	13-8PH
Cold rolled stainless steel coil	Thickness: 0.3mm- 3.0mm, Width: 1000mm - 2000mm,Surface: 2B/BA/SB/8K/HL/1D/2D etc
Hot rolled stainless steel coil	Thickness: 3.0mm - 16mm, Width: 1000mm - 2000mm Surface: No.1/pickling
Standard	ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303, BS 1449, DN17441, G4305

13-8PH stainless steel pipe sizes and specifications
Grade	13-8PH
Stainless steel seamless pipe	Outside diameter: 4.0 - 1219mm, Thickness: 0.5 -100mm,Length: 24000mm
Stainless steel welded pipe	Outside diameter: 6.0 - 2800mm, Thickness: 0.3 -45mm,Length: 18000mm
Stainless steel capillary pipe	Outside diameter: 0.4 - 16.0mm, Thickness: 0.1 -2.0mm,Length: 18000mm
Stainless steel welded sanitary pipe	Outside diameter:8.0- 850mm, Thickness: 1.0 -6.0mm
Stainless steel seamless sanitary pipe	Outside diameter: 6.0- 219mm, Thickness: 1.0 -6.0mm
Stainless steel square pipe	Side Length: 44 - 300300mm, Thickness: 0.25 - 8.0mm, Length: 18000mm
Stainless steel rectangular pipe	Side Length: 46 - 200400mm, Thickness: 0.25 - 8.0mm, Length: 18000mm
Stainless steel coil pipe	Outside diameter: 0.4 - 16mm, Thickness: 0.1 - 2.11mm
Standard	American Standard: ASTM A312, ASME SA269, ASTM A269, ASME SA213, ASTM A213 ASTM A511 ASTM A789, ASTM A790, ASTM A376, ASME SA335, B161, SB163, SB338, SB667/668 Germany Standard: DIN2462.1-1981, DIN17456-85, DIN17458-85· European Standard: EN10216-5, EN10216-2 Japanese Standard: JIS G3463-2006, JISG3459-2012 Russian Standard: GOST 9941-81

13-8PH stainless steel profile sizes and specifications
Grade	13-8PH
Specification	EN, DIN, JIS, ASTM, BS, ASME, AISI, ISO
Standard	ASTM A276/ASME SA276, ASTM A479/ASME SA479 & ASTM A164/ASME SA164 .
Stainless steel round Bar	Diameter: 2mm - 600mm
Stainless steel bright Bar	Diameter: 2mm - 600mm
Stainless steel hex Bar	Dimension: 6mm - 80mm
Stainless steel square bar	Dimension: 3.0 - 180mm
Stainless steel flat bar	Thickness: 0.5mm - 200mm, Width: 1.5mm - 250 mm
Stainless steel angle bar	as requirements
Length	Normally 6m, or produce as requirements
Surface	Black, Bright. Peeled and Polished, Solution annealed.
Delivery condition	cold drawn, hot rolled, forged, grinding, centerless grinding
Tolerance	H8, H9, H10, H11, H12, H13,K9, K10, K11, K12 or as per clients’ requirements